Table of Contents
Advertisement
KRC-1050_
MECHANISM OPERATION DESCRIPTION |
AUTO REVERSE
a
Zz
3.
4.
12
When the end of the taps is reached during play-
back and the reel disk assembly (22) stops rotat-
ing, the ED plate (28) is pushed by the ED gear (26)
(O).
The ED gear (26) rotates and the boss pushes the
ED. plate (28) further (@).
The ED plate (28) pushes the trigger arm (81) (@).
The trigger arm (81) releases the reverse gear (27)
lock (@}). (The "program" operation starts.)
8]
In the same way, during FF and REW, the ED plate
operates when the tape end is reached, When the
plate (64) moves ( @), the lock plate (96) rotates
(@) and the FF/REW lever is released, causing
the deck to enter play mode (®).
The pin at the lower side of the reel disk assembly
(22) resets the ED plate (28) (@).
Advertisement
Table of Contents
