Table of Contents
Advertisement
Installation & Removal
INSTALLATION
1. Back the tractor up to the front of the tiller. The
tiller mounting points (figure 1) should be lined up
with the hitch mounting points (figure 2).
2. Stop engine, remove key, and set the parking
brake.
3. Attach the tiller to the hitch with two pins and
spring dips thru the mounting points shown in
fiugres 1 and 2.
Figure 1. Tiller Mounting Points
Figure 2. Tractor Mounting Points
4. Attach the lift rod to the tractor lift lever with
spring clip. See figure 3.
Figure 3. Lift Lever
A. Lift Lever
B. Lift Rod
C. Spring Clip
5. Attach the rod guide on the lift rod (item B, figure
4) to the tiller lift arm (item C) with spring clip.
Figure 4. Tiller Installation
A. Pulley Support
G. Pin
B. Rod Guide
H. Spring Clip
C. Lift Arm
I.
Tiller Clutch Lever
D. Clutch Link Clevis
J. Spring Clip
E. Pin
K. Spring Clip
F.
Bracket
Advertisement
Table of Contents
