Assembling The Breast Pump - Nutrea DoubleFlow Instruction Manual

Assembling the breast pump

7
Wash your hands thoroughly before assembling the pump. Before use,
ensure that all washable parts are cleaned and disinfected as described
in this manual. And make sure all parts are dry before assembling.
STEP 1
Fit the valve into the breast
shield connector and make
sure the valve is pushed in
properly.
STEP 3
Attach the diaphragm cap to
the diaphragm and breast
shield connector and press
firmly.
STEP 2
Install the diaphragm onto
the breast shield connector.
STEP 4
Install the silicone breast
shield onto the breast shield
brace. Press the edge of the
silicone breast shield over the
breast shield brace, making
sure the gaps are properly
aligned.
STEP 5
Firmly insert the tube adapter
into the diaphragm cap.
STEP 7
Firmly insert the tubing
adapter into the breast pump
motor.
8
STEP 6
Tighten the breast shield
connector onto the bottle
securely.
STEP 8
Repeat the steps for the
second double-sided
pumping bottle. The
installation is complete and
the breast pump is ready to
use.