LuxenHome WHAP1807 Instruction Manual

Set of 2 pre-lit snow-flocked potted artificial christmas tree

Item #:

Product Name:

Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards

of safety and quality.

PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.

Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged

parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description

Tree

Tree Pot

1. Decide on an appropriate location for your product, please read assembly and Instruction procedure carefully.

Note: These trees may utilize light sets that are marked for indoor and outdoor use, but the artificial trees are

for indoor display or covered outdoor display.

2. Retain the instructions for future use and save the carton for storing your trees.

Assembly and Instruction Procedure (no tools required for assembly):

Remove all packaging (i.e., cardboard or plastic) before beginning. We suggest unpacking the trees on a large cloth.

Some of the flocking may come off during unpacking and fluffing of branches.

1. Put each pot base on a flat surface then insert the tree body into each pot firmly. Make sure the tree pole is

firmly inserted into the pot.

2. The branches on your tree can be adjusted to give your tree the desired fullness. Begin to shape the branches

from the bottom of the tree to the top. Start with the tree tips farthest away from the center pole.

Gently lower all branch tips on tree. Take care not to place unnecessary pressure on the brackets during

assembly.

For best results, straighten and separate all branch tips, then bend them slightly upward.

WHAP1807

Set of 2 Pre-lit Snow-Flocked Potted Artificial Christmas Tree

Quantity

Instruction Manual

Please save this manual for future reference.

Table of Contents

Do you have a question about the WHAP1807 and is the answer not in the manual?

Page 1 Instruction Manual Please save this manual for future reference. Item #: WHAP1807 Product Name: Set of 2 Pre-lit Snow-Flocked Potted Artificial Christmas Tree Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality.
Page 2 Instruction Manual Please save this manual for future reference. Item #: WHAP1807 Product Name: Set of 2 Pre-lit Snow-Flocked Potted Artificial Christmas Tree Battery box button function: 1. Open the battery compartment. 2. Small Tree: Insert 4 AA batteries (not included). Do not mix alkaline, standard, or rechargeable batteries.
Page 3 Instruction Manual Please save this manual for future reference. Item #: WHAP1807 Product Name: Set of 2 Pre-lit Snow-Flocked Potted Artificial Christmas Tree Storage: Remove all decorations (this does NOT include the pre-installed string lights). Remove each tree from its pot. Press the tree tips back up against the pole.