Panasonic NE-1257R Operating Instructions Manual page 11

How ta. Op Operate
D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Beli] olism com elcejele-litme mem Ciii(-t-me)l macsr-l (ale melii-mielmelelelei-Mmeder-lnelamralcemy [elierel-leiii(-lile] am er: 16 mae
Keep the door closed.
# Digital Display Window must be blank.
Press Prog pad.
# "PROG' will start to blink.
Press Number/Memory pad "5S".
The selected pad number will appear and currently programmed
information will be indicated.
Press Double Quantity pad.
# The currently programmed magnification number will appear.
Note: 1.6 times is preset at factory.
Press Number/Memory pads "1" and "5" for 1.5 times.
# The programmed magnification number will appear.
lf pad 5 is programmed for 3 minutes, the time for the double quantity
will be 4 minutes and 30 seconds.
Available range is 0.1-5.0 times.
Press Prog pad.
@ "PROG" will stop blinking.
This means that you have completed programming.
Note:
« If you want to program your desired magnification number for triple quantity, repeat as above, using Triple
Quantity pad instead of Double Quantity pad.
E. PROGRAM LOCK
@ To Activate Program Lock:
Keep the door closed.
# Digital Display Window must be blank.
Press Prog pad until "PROG", "P" and "L" appear. (more than five
seconds)
w# "PROG", "P" and "L' will appear.
In Program Lock mode:
¢ The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.
¢ Opening the door cancels the remaining time on the program.
* The oven can not be programmed or run manually until the program lock is released.
-11-