4. Troubleshooting
4.3. Initialization & Update
4.3.1. USB Update procedure
1) Step 1 : Power on the device. And change Mode to USB Input Mode.
(Standby Mode : Set Power is On, But LED Display is not on.)
2) Step 2 : Prepare the USB disk with update files then plug-in to the USB port. You can see the blinking of front led display.
3) Step 3 : If the blinking stop, update is finish.
※ ※ ※ Update method of MICOM and MPEG is same.
4.3.2. How to initialize
Using the remote control
1) Let Set be Standby Mode.
2) Push "Next" Button during about 5 seconds, using Remote Controller.
3) Front LED will be blinking 2 times.
4) Initialization complete.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
4-7