Danger! 2.2 Items supplied When using the equipment, a few safety pre- Please check that the article is complete as cautions must be observed to avoid injuries and specifi ed in the scope of delivery. If parts are damage. Please read the complete operating missing, please contact our service center or the instructions and safety regulations with due care.
businesses or for equivalent purposes. Keep the noise emissions and vibrations to a minimum. • Only use appliances which are in perfect wor- 4. Technical data king order. • Service and clean the appliance regularly. • Adapt your working style to suit the appliance. Motor power supply: .......
Page 14
immediately each time after it has been used. 7. Press the stapler head and trigger catch (6) • Each time before starting work, check that the against the workpiece and press the trigger trigger catch functions perfectly and that all (1);...
To ensure that items are properly packaged 6.2 Triggering shots (Fig. 1) and delivered when you send them to us, The built-in trigger locks prevent the cordless please contact our customer service or the nailer from being triggered accidentally. Triggering point of sale at which the equipment was is therefore only possible by pressing the stapler purchased.
10. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The char- ging times are shown directly on the charger.
* Not necessarily included in the scope of delivery! Please register the product warranty of Einhell brand products. Customers must scan the QR Code of the Serial number in the product or QR code on the box, to additional 6 months warranty for the whole battery and battery charger (Note: Promotion is change without prior notice.
Need help?
Do you have a question about the TE-CN 18 Li and is the answer not in the manual?
Questions and answers