Advertisement
[C] Using the KX-P1124i with KX-PS10
When using the KX-P1124i with KX-PS10, the following conditions
must be set through the EZ Set Operator Panel on the KX-P1124i.
The following INTERFACE
menu
will be added to the existing
menus. Only data length is selected in the
25 for data length selection).
INSTALL menu (see page
Main Menu
Item-Menu 9
Selection
Function
INTER-
FACE
BAUD RATE
#
#: 9600", 4800, 2400, 1200,
600, 300, 150
Selects one of 7 printer baud
rates.
PARITY
IGNORE
|
Selects one of 4 parity
controls.
PROTOCOL
XON/OFF
Selects DTR Protocol or
X/ON-X/OFF Protocol.
SDT
RBC 128°
RBC 512
Selects the remaining buffer
capacity (R.B.C.) 128 byte or
512 byte to suspend data
transfer (S.D.T.) (X/OFF).
RDT
SDT+ 128°
SDT +256
Selects the remaining buffer
capacity (R.B.C.) 128 byte or
256 byte to resume data
transfer (R.D.T.) (X/ON).
DTR SGNL
MARK*
When the signal is "MARK",
the printer tells the computer
that it cannot accept
transferring data.
SPACE
When the signal is "SPACE",
the printer tells the computer
that it cannot accept
transferring data.
(FACTORY settings are denoted with *.)
iS
Advertisement
