Advertisement
Quick Links
Assembly & Maintenance Manual
**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION****
Warning:
•
Do not pump boiling liquid through your ANVIL Brewing Pump-XP, this could lead to permanent damage of the impeller and
motor.
•
Do not submerge motor in liquid at any time, this can lead to electrocution happening.
Always power on by connecting to a GFCI outlet, to prevent electrocution from an unknown short.
•
Do not open the priming vent valve when the pump is running, as hot liquid can escape from the 3/8" barb when the vent ring
is pulled.
Caution:
•
Use caution when handling, as the pump may be hot.
•
Never install a throttling valve on the inlet side of the pump. This will cause cavitation on the pump, potentially leading to
product damage. Use a valve on the outlet of the pump to stop and control the pump's flow.
•
Never run the pump dry, as permanent damage may result.
Anvil Brewing Pump - XP
©Anvil Brewing Equipment 2023
www.anvilbrewing.com
Brewing Pump-xp
1
anvilbrewing.com
Advertisement
Summary of Contents for Anvil XP
- Page 1 **** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION**** Warning: • Do not pump boiling liquid through your ANVIL Brewing Pump-XP, this could lead to permanent damage of the impeller and motor. • Do not submerge motor in liquid at any time, this can lead to electrocution happening.
- Page 2 Assembly • The ANVIL Brewing Pump XP (XP Pump) will come fully assembled. Prior to the first use, disassemble the pump head by removing the tri-clamp, head, impeller, and vent valve. Wash the parts in your favorite non-chlorine based cleaner.
- Page 3 3. This warranty does not cover, and in no event shall ANVIL Brewing Equipment be liable for, travel, lodging, or any other expense incurred due to manufacturing defects in material and work manship, or any other reason.