OpenEye MT Series Quick Start Manual

Cloud managed server

MT-Series Cloud Managed Server Quick Start Guide -

Discontinued

This guide will assist you with the initial setup of your cloud managed server and recording software. This guide includes

hardware setup, software setup, and connecting your server to the Web Services Portal.

OE-MT Quick Start Guide Hardcopy

Click the link if you need to download the original hardcopy of the

Getting Started

1. Connect the network cable intended for remote connections to the Client Network Port.

NOTE: The Camera Network Port is intended for use with a dedicated camera network.

2. Connect the supplied mouse using a USB port.

3. Connect a monitor using the HDMI® port.

4. Plug the supplied power cord into the recorder and connect it to a power source.

See

Setup Wizard

for logging into the server software and connecting to OpenEye Web Services (OWS).

After completing the Setup Wizard, and logging in to OWS, see

the recorder to OWS.

1. Click Setup (Gear Icon).

OE-MT QSG

included with the boxed contents.

Registering a Recorder to an OWS Account

to connect

Table of Contents

Do you have a question about the MT Series and is the answer not in the manual?

Page 1 4. Plug the supplied power cord into the recorder and connect it to a power source. Setup Wizard for logging into the server software and connecting to OpenEye Web Services (OWS). After completing the Setup Wizard, and logging in to OWS, see...
Page 2 5. Check the appropriate boxes to select the camera(s) to be added. 6. Enter the appropriate credentials (username and password) for the cameras to be added, and then click Add Selected Cameras. Adding Cameras Manually 1. Click Setup (Gear Icon). 2. Select Cameras under General Configuration. Copyright © OpenEye 2023...
Page 3 Best Practices • This product must be powered only from the type of power source indicated on the label. If uncertain of the type of power supply to the building, consult product dealer or local power company. Copyright © OpenEye 2023...
Page 4 CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Maintenance must be performed by qualified personnel only. Related Links Setup Wizard Registering a Recorder to an OWS Account Advanced Camera Management OE-MT Copyright © OpenEye 2023...