Advertisement
Quick Links
Advertisement
Related Manuals for Retrospec Chatham Rev+
Summary of Contents for Retrospec Chatham Rev+
- Page 1 Assembly Instructions...
- Page 2 We strongly recommend taking your bike to a local bike shop after assembling so a professional, reputable bike mechanic can check your work and perform all necessary safety checks prior to the first ride. To find a Retrospec dealer near you, please visit https:/ /retrospec.com/pages/store-locator.
- Page 3 If the conditions in this manual are breached, the warranty will be Should any original component prove defective in terms of workmanship within its void automatically. warranty period, we will replace it. Warranty period for Retrospec electric bikes is as follows: 2. Saddle and Handlebar Set-Up The saddle can be easily moved either up or down.
- Page 4 After you have made any adjustment to your electric bicycle, check that all nuts WARNING! Handlebar stem minimum insertion mark on traditional quill stem and bolts are securely tightened and cables are free from kinks and fixed securely must NOT be visible above the top of the headset. If the stem is extended beyond to the electric bicycle frame.
- Page 5 5. Assembly Instructions Step 2: Front Wheel & Front Fender Installation Following is important information and instructions for assembling and maintaining your new electric bicycle. 2.1 Installing the Front Wheel Step 1: Unpacking Your Bike Remove the plastic dropout protector from the metal shipping axle (Fig. 6). Unscrew and remove the metal shipping axle from the fork dropouts.
- Page 6 Step 3: Seat Assembly (Refer to Fig. 8) 2.2 Installing the Front Fender 3.1 - Assembling the Saddle onto the Seatpost: Locate the long bolt, washer, and nut which will either be in the parts bag/ box or inserted in the top of the fork. Loosen the seat clamp nut.
- Page 7 Step 4: Handlebar & Handlebar Stem Assembly (Refer to Figs. 12 & 13) Step 5: Installing Pedals (Refer to Fig. 14) The handlebar has been pre-assembled together with brake levers, shifter levers The pedals are marked with either a “R” (Right) or “L” (Left) on the threaded end and grips.
- Page 8 Retrospec or you dealer for additional assistance. Fig. 18 The hydraulic brakes are self-adjusting, but will require annual bleeding of the fluid. Retrospec highly recommends this be done by an experience authorized We strongly advise you have your brakes periodically checked and maintained by dealer.
- Page 9 • NOTE: For good shifting and riding experience, follow these 4 actions: Operate the shift lever to shift the chain from top gear to 2nd gear. • If the chain will not move to the 2nd gear, turn the cable adjusting barrel on Shift only when pedaling (forward), do not shift when stopped.
- Page 10 3. Battery Installation & Usage • We strongly advise wearing an approved helmet which meets local safety Retrospec Chatham Rev Plus 36V/350W E-bikes have the battery positioned in standards. the down tube. NOTE: You can pedal one crank revolution to start the motor or •...
- Page 11 Dimensions 4.3 Display area 4.1 Material and Color 4.4 Button Definition K5304 product housing is made of white and black PC materials. The main body of the button is made of PC material, and the button part is made of soft silicone material, all in black. There are three buttons on the K5304 display.
- Page 12 4.6 User Interface To reset the trip distance, hold the [mode] and [down] buttons for 2 seconds at the same time with the bike on, and the Trip (single mileage) of the display will be cleared. Walk Assist Mode When the display is turn on, hold the [DOWN] button for 3 seconds, the e-bike will enter the state of walk assist mode.
- Page 13 4.7 Error Code 4.8 User Settings When the e-bike electronic control system fails, the display will automatically When the e-bike electronic control system fails, the display will automatically display ERROR code. For the definition of the detailed error code, see the list display ERROR code.
- Page 14 7. Using and Maintaining the Electric Hub Motor The casing is opened Connector is broken Retrospec intelligent e-bikes are programmed to start after a rotation of the The display leaves the factory; the casing is scratched or the casing is pedals (crankset).
- Page 15 WARNING! NEVER open the controller box. Any attempt to open the controller 11. Maintaining the Throttle box, modify or adjust the controller will void the warranty. Please ask your local dealer or authorized service specialist to repair your bike. Take care to protect the throttle from impact or damage. If your bike falls or you are in a crash, make sure to check the throttle function before riding.
- Page 16 13. Main Technical Specification Sheet After plugging the power 1) trouble from the power 1) check and repair the outlet, no charger indicator outlet; 2) poor contact power outlet. 2) check and Please find model name of your bike below: LED is lit.
- Page 17 Making nature second nature.
Need help?
Do you have a question about the Chatham Rev+ and is the answer not in the manual?
Questions and answers