Battery Chassis Installation; Back Panel Installation; Installation Test; Strike Plate Installation - Pyramid PL100 Installation Manual

ELECTRONIC DIGITAL DOOR LOCK INSTALLATION
Model PL100
Battery Holder Chassis Install
Place rubber pad between chassis/door and pull
1
wire through wire hole in chassis.
2
Attach battery holder chassis with screws
B1 or B2 (depends on door width)
3 Connect wire harness to battery connector
Back Panel & Battery Install
1 Install 4 AA alkaline batteries (Not included).
Install back panel with 2 screws (E)
2

Installation Test

Check the flexibility of inside/outside door
1
handles.
2
Test standard keys
Strike Install
Install latch protector and strike plate with 2
1
screws (A)
8 PRODUCT INSTALLATION GUIDE
Rubber Pad
Screw B1(x2) or B2(x3)
Batteries
888.479.7264
Connect
Wire