Advertisement
Usage Guidelines
1. To avoid loud pops while engaging phantom power
to the unit, be sure all volume levels in your signal
chain are muted.
2. While the steel chassis does shield the transformer
from most electro-magnetic interference, it is always a
good idea to avoid placing the unit near power amps
whenever possible.
3. If you experience hum after connection, try engaging
the "GROUND LIFT" switch on the back of the TDI. If
hum continues, try removing or powering off other
devices in the same power circuit.
4. For hotter sound sources, you may want to consider
using the PAD function for a -20dB attenuation.
Advertisement
