Advertisement
The higher the number of the switch
position, the lower the headlight beam
level. Always keep the headlight beam at
the proper leveling position, or headlights
may dazzle other road users.
Listed below are the examples of proper
switch settings. For loading conditions
other than those listed below, adjust the
switch position so that the beam level
may be the nearest as the condition
obtained according to the list.
Loading condition
Switch position
Driver only
Driver + Front passenger
Driver + Front passenger
+ 3rd row passenger*
Full passengers
(including driver)
Full passengers (including
driver) + Maximum per-
missible loading
Driver + Maximum per-
missible loading
* if equipped
0
Headlight washer (if equipped)
0
To operate the headlight washer, turn on
the headlight washer switch. It will oper-
1
ate when the tail lights or headlights are
ON and the ignition switch is in the ON
position. The washer fluid will spray on
1
the headlights.
Also, if you pull the wiper lever towards
you when the headlights are on, the
headlight
washer
2
equipped)
3
✽ ✽ NOTICE
• Check the headlight washers periodi-
cally to confirm that the washer fluid
is being sprayed properly onto the
headlight lenses.
• The headlight washer may not work
temporarily if it freezes after a car
wash, rain or snow in the winter. But
it will work normally after it defrosts.
OCM040127
will
operate. (if
Features of your vehicle
4 69
Advertisement
