Download Print this page

Black & Decker Price Pfister Avalon 48-CB Series Instruction Manual page 2

Lavatory faucet

Advertisement

Thank you for purchasing this Price Pfi ster Lavatory Faucet. All Price Pfi ster products are carefully engineered and factory tested to provide
long trouble-free use under normal conditions. This Lavatory Faucet is easy to install using basic tools and our easy to follow illustrated
instructions. If you have any questions regarding your Lavatory Faucet installation, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.
Price Pfi ster recommends calling a professional if you are uncertain about
installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
• PTFE plumber's tape or thread sealant
• Slotted screwdriver • Phillips head screwdriver
• Adjustable wrench • Flashlight
Your installation may require supply lines and/or shut-off valves, cone washers,
friction rings, or other additional tools. Consult the store where your faucet was
purchased for recommended connections that may be required for you area.
4
E
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are
included.
A Faucet
B Lift Rod
C Wingnuts (2x)
If any of these items are missing, please contact Price Pfi ster Consumer Service
at 1-800-Pfaucet (1-800-732-8238).
• Plumber's putty
• Pliers
• Cloth
A
C
B
D
D Putty Plate
E Pop-Up Assembly
ENGLISH
FAUCET INSTALLATION STEPS
5
BOTTOM GROOVE
5 PUTTY PLATE ATTACHMENT
Following manufacturer's recommendations on use, apply plumber's putty
into putty groove in bottom of Putty Plate (5A). Install the Putty Plate over
the three holes in your sink.
6
6 FAUCET INSTALLATION
Insert Faucet Shanks (6A) through the end holes of the sink. Press Deck Plate
(6B) onto Putty Plate (6C).
2
6A
5A
6B
6A
6C

Advertisement

loading