Connections Between The Vitodens And The Dhw Cylinder - Viessmann VITODENS 050-W Technical Manual

Installation accessories
Neutralising system with wall mounting bracket
Part no. ZK03652
■ For condensing boilers up to 35 kW
■ With neutralising granulate
■ With connection elbows for DN 20 hose connection
■ With 2 corrugated hoses with fixing clamps (719 mm, 0.7 to
1.95 m long)
200

Connections between the Vitodens and the DHW cylinder

Connection set for Vitocell 100-W DHW cylinder, type CUGA-A
below the boiler, with connection pipes
Part no. ZK04709
Comprising:
■ Cylinder temperature sensor
■ Connection pipes on the heating water side
■ Connection pipes on the DHW side
Surface or flush mounting
VITODENS
(cont.)
300
361
Neutralising granulate
Part no. ZK03654
2.5 kg
To match the neutralising system, part no. ZK03652
Water spray protection
Part no. 7590109
To ensure adherence to the required protection class. Must be
ordered separately for open flue operation.
Small softening system for heating water
For filling heating circuits
See Vitoset pricelist
Tool kit
Part no.: ZK04569
For maintenance and service
Case with all tools required for maintenance and service: Screw-
driver, extension and inserts
Connection set for Vitocell 100-W DHW cylinder adjacent to the
boiler
Comprising:
■ Cylinder temperature sensor
■ Connection fittings
DHW cylinder to the left or right of the Vitodens
■ Threaded fitting version
Part no. ZK04710
■ Solder version
Part no. ZK04711
4
VIESMANN
33