Page 1
ZICO ® Sure-Grip Tool Mounts 3085PM10 Model: SG-VM-275 and SG-VM-275-Y Parts and Instruction Manual • 2 3/4" Stand off from mounting surface to bottom of the tool craddle. • 3/4" to 2" Grip Range • Molded-in support arm provides assistance and stability while securing tool •...
Page 2
Parts Diagram/Breakdown Item # Part # Description 3085-650-101 BASE, SURE GRIP 2 3/4" 3085-650-103 STRAP, BLACK 3085-655-103 STRAP, YELLOW 9114-161312 FENDER WASHER, #6 X 3/4" O.D. S/S 9125-191306 SCREW, #6 x 3/8" THREAD CUTTING, PHIL PAN HD, SS 3085-650-105 RUBBER PAD WITH ADHESIVE Page 2...
Page 3
Dimensions Note: 2" Spacing designed to mount easily to Zico Tool Boards. Page 3...
Page 4
3. Place two sure grips in line so that each end of the tool is supported (see cover). 4. Use two 1/4” bolts, nuts, and washers to mount Sure-Grips in the desired location. When mounting to Zico Aluminum Tool Boards use the 2" spaced mounting holes, we advise using Truss Head bolts.(See page 3)