LG 50NANO819PA User Manual page 100

Controller, MICROSOFT Xbox Series X
This feature is available for Bluetooth-enabled models only.
Connecting multiple Bluetooth devices may result in poor connection or operation.
If the Bluetooth device is too far from the TV, or there are obstacles between them, they
may not operate normally.
Depending on the peripherals (wireless router, microwave oven, etc.), communication
failures may occur.
If the device you selected from
and then reconnect the device.
It's differ form devices. For more information on the device you want to connect to, refer
to its user guide.
Camera
You can set access permissions to the camera for each app.
Universal Control Settings
If you set up the universal remote control, you can control peripheral devices
connected to the TV with the Magic Remote instead of their own remote controls.
For more information, see
in User Guide.
TV On With Mobile
If Turn on via Wi-Fi/Turn on via Wi-Fi(Networked Standby Mode)
Bluetooth/Turn on via Bluetooth(Networked Standby Mode)
turn on your TV using an application that supports
The TV should be connected to a network.
The TV and the device to be used should be connected to the same network.
The Turn on via Wi-Fi
used in an app on a smart device that supports the feature.
Turn on via Bluetooth
available on some smartphones.
The TV must be plugged in.
To connect for the first time, make sure the device to be used is ready to connect.
Some models may not be supported.
Delete Connection History
You can delete the connection history of the devices connected to the TV on the
wireless network.
Registered Devices
How to Operate TV Using Universal Remote Control
/ Turn on via Wi-Fi(Networked Standby Mode)
/ Turn on via Bluetooth(Networked Standby Mode)
100
does not reconnect,
is set to On, you can
TV On With Mobile.
Disconnect
or Turn on via
feature must be
is only