7.5. AV Ass'y
1. Remove the back cover (see. 7.2.)
2. Remove tie cable(1pcs
(1pcs
) to free the cable.
3. Disconnect the coupler (connector PA09)
4. Remove the fixing screws (3pcs
5. Remove the AV Ass'y
7.7. TTL Ass'y
1. Remove the back cover (see. 7.2.)
2. Unlock the coupler(CONN WAFER P902) to free the
FFC cable(P902A).
3. Remove the TTL Ass'y with FFC cable.
FFC CABLE
4. Unlock the coupler(CONN WAFER P905) and remove
FFC cable.
FFC CABLE
5. Remove the TTL Ass'y.
) and unlock the clamp wire
)
PA09
P905
7.6. INVERTER
1. Remove the back cover (see. 7.2.)
2. Disconnect the coupler(connector P502A)
3. Disconnect the backlight interface connectors which
are introduced from LCD panel.
4. Remove the fixing screw (4pcs
5. Remove the INVERTER.
7.8. Speaker (left and right)
1. Remove the back cover (see. 7.2.)
2. Remove the LED Ass'y (see 7.4.)
3. Remove tie cable(1pcs
pler (CONN AS SP01A)
4. Remove the fixing screws (8pcs
5. Remove the speaker (left and right).
LED Ass'y
11
)
backlight interface connector
P502A
) and disconnect the cou-
)
SP02
TX-20LB5F/G
TX-20LB5P/G