East West Furniture VNT Assembly Instructions page 2

Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO Description Qty
A Top 1
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following
hardware:
NO Description Qty
Bolt
1 8
(M8x70)
Flat Washer
3 8
(8.5x19mm)
VERNON SQUARE COUNTER HEIGHT PUB TABLE 36x36x36''TABLE
PART LIST
Sketch
HARDWARE LIST
Sketch NO
2
4
- 2 -
NO Description Qty
B Table Leg
Description Qty
Lock washer
8
(8.5x11mm)
Allen key
1
(M4mm)
Sketch
4
Sketch