Download Print this page

F&F ZI-17 Manual

Pulse power supply, stabilized

Advertisement

Quick Links

Pulse power supply,
stabilized
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
ZI-17 is used to supply electrical and electronic equipment that
requires a stable, filtered supply voltage independent of the ma-
ins voltage changes.
Mounting
1. Turn off the
2. Connect the power cables to the power supply input termi-
nals: terminal 1 to L and terminal 3 to N.
3. Connect the receiver to the output terminals of the power
supply in accordance with the markings: (+) to terminal 10,
(–) to terminal 12.
ZI-17
power.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F ZI-17

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose ZI-17 is used to supply electrical and electronic equipment that requires a stable, filtered supply voltage independent of the ma- ins voltage changes.
  • Page 2 Wiring diagram - 2 -...
  • Page 3 Technical data input voltage 100÷264 V AC output voltage 14.5 V DC output current 0.8 A output power 12 W current limitation 110% Iout load minimum keying frequency 70 kHz terminal 2.5 mm² screw terminals tightening torque 0.4 Nm working temperature -10÷40°C dimensions 1 module (18 mm)
  • Page 4 Warranty F&F products are covered by a 24-month warranty from the date of purchase. The warranty is only valid with proof of purchase. Contact your dealer or contact us directly. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.