Download Print this page

F&F ZI-USB-5 Quick Start Manual

Usb power supply

Advertisement

Quick Links

ZI-USB-5
USB power supply
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The ZI-USB-5 is used to power electrical and electronic devices
via the standard A-type USB output.
Mounting
1. Turn off the power.
2. Connect the power cables to the input terminals 1-3 of the
power supply in accordance with the markings: 1 (+) and 3 (–).
3. Connect the cable with the USB A plug to the socket located at
the bottom of the module.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F ZI-USB-5

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose The ZI-USB-5 is used to power electrical and electronic devices via the standard A-type USB output. Mounting 1. Turn off the power.
  • Page 2 Connection diagram - 2 -...
  • Page 3 Technical data input voltage 12÷40 V DC output voltage 5 V DC output current 2.1 A output power 10.5 W current limitation Imax=110% Iout load minimum terminal 2.5 mm² screw termnals tightening torque 0.4 Nm output USB port working temperature 0÷40°C dimensions 1 module (18 mm) mounting...