How To Use The Front Event Button; How To Use The Event Contact On The Rear Panel - Inter-m MSP-6142 Operation Manual

MULTI SOURCE PLAYER

How to use the front EVENT button

How to use the front EVENT button
1. How to add a sound source
# USB does not support EVENT mode.
*Create an EVENT folder (capital letters) on the SD-CARD and add the sound source to use.
# By default, a track number (1 to 10) is assigned to the number of the EVENT button.
2. Play/stop function of assigned track
*Select the EVENT mode with the SOURCE button.
# It is displayed as "STOP" mode at the beginning of EVENT.
* Play the EVENT with the number buttons on INSTANT PLAY.
# The EVENT number, track title, and playing time are displayed.
# If there is no sound source, "NO FILE" is displayed.
* Stop playback with the STOP button.
3. Save the designated track INSTANT number
*Select the EVENT mode with the SOURCE button.
*Select a track with the SKIP button or tune control.
*"MEMO" is displayed for about 10 seconds, and "MOME" mode is automatically released if there is
no input for more than 10 seconds.
*INSTANT Select the number to save with the number buttons (1 to 10) and it will be saved.

How to use the EVENT contact on the rear panel

How to use the EVENT contact on the rear panel
1. It has the same function as the INSTANT PLAY button on the front of the product and is used for re-
mote playback.
2. The sound source must be stored in the INSTANT number.
# If there is no stored sound source, "NO FILE" is displayed.
# Only files in the EVENT folder are played.
3. When a contact occurs, the sound source of the corresponding INSTANT number is played.
# If the same contact occurs during playback, playback stops.
4. If another contact occurs during playback, the sound source of the corresponding INSTANT number
is played.
12 MSP-6142