Advertisement
FN+ | ~' | = | Specific lights | Programming software definitions, first press in, second press out, Shutdown memory. |
!1 | Quick color | Every click RGB lights of the keyboard will loop switch between red - green - blue - purple - green - white - off - sunset - relax; Shutdown memory. (sunset is warm colour, relax is cold colour, dynamically) | ||
@2 | Meteor shower | First press for single light meteor shower, second press for five lights meteor shower, third press for exit. The background are chosen by specific lights and seven color switch; the time lights stranded are chosen by FN+←/→; Shutdown memory. | ||
#3 | Ripple/Aurora | First press for ripple, second press for aurora, third press for exit; the background are chosen by specific lights and seven color switch; the time lights stranded are chosen by FN+←/→; Shutdown memory. | ||
$4 | Breath | First press for single light breath(the background are chosen by specific lights and seven color switch), second press for seven lights loop switch breath, third press for exit; the frequency are chosen by FN+←/→; Shutdown memory. | ||
%5 | Demo | Demonstrate all kinds of lights. Stop demo by FN+SPACE. The frequency chosen by FN+←/→; Shutdown memory. | ||
↑ | luminance + | Add luminance in 6 levels | ||
↓ | luminance - | Minus luminance in 6 levels; Close the backlight after the lowest brightness | ||
← | Frequency + | Regulate the time of light effects in 5 levels; Regulate the luminance of the indicator when the backlight is true off. | ||
→ | Frequency - | Regulate the time of light effects in 5 levels; Regulate the luminance of the indicator when the backlight is true off. |
FN+ | ESC | = | Number Lock | Lock/Unlock number keyboard and disable it; Number keyboard be lock and numlock indicator is off. Press numlock key can't open the numlock indicator. Shutdown don't memory. |
F8 | Adjust trigger point | Adjustable Trigger point (high/middle/low stage) Shutdown memory. Default in fit trigger point. | ||
L-Ctrl | Caps/Ctrl exchange | Press 3 seconds for indicator flash 1 times. Achieve the exchange between "left Ctrl" and "Caps". Shutdown memory | ||
Win | Win Lock | Press 3 seconds for indicator flash 1 times, open Win, App Key; indicator flash 2 times, lock Win, App key. Disable in Mac OS; Shutdown memory | ||
L-Alt | Win/Mac | Press 3 seconds for indicator flash 2 times, Match Mac OS( Achieve the exchange between "left Win" and "Left Alt", "Right Alt, FN, Right Ctrl be place of FN, Right Win, Right Alt"). Press 3 seconds for indicator flash 1 times, match Win OS(key to return), Shutdown memory Note:
| ||
Q | Unit Time | 4 gear to adjust the time required by the mouse cursor to move a cell. respectively, USB:8/6/4/2ms, Bluetooth: 12/9/7/5 ms; corresponding indicator flash 1-4 times; Shutdown memory | ||
E | Unit Pixel | 4 gear to adjust the number of pixel required by the mouse cursor the move a cell. respectively, 2/3/4/5points; corresponding indicator flash 1-4 times; Shutdown memory | ||
[{ | Repeat Rate | 4 gear to adjust the speed of key hitting, respectively, ×1, ×2, ×4, ×8, corresponding indicator flash 1-4 times; In USB/Bluetooth mode, ×1 restore normal to send code, response delay adjustment is invalid; Default in the first gear; Shutdown doesn't memory | ||
]} | Response Delay | 3 gear to adjust the keystroke response delay, respectively, 500, 300, 100ms, corresponding indicator flash 1-3 times; Default in the first gear; Shutdown doesn't memory | ||
F9 | BD1 | Long press 3s into pair status, BD1 led flash quickly; short press into reconnect status, BD1 led flash slowly; shutdown memory | ||
F10 | BD2 | Long press 3s into pair status, BD2 led flash quickly; short press into reconnect status, BD2 led flash slowly; shutdown memory | ||
F11 | BD3 | Long press 3s into pair status, BD3 led flash quickly; short press into reconnect status, BD3 led flash slowly; shutdown memory | ||
F12 | Bluetooth start |
| ||
Del | "M" Key | Press to exchange Office mode and Program mode, "M" Light turned on and off after 1 second at Office mode, "M" Light turned on and off after 10 seconds at Program mode. Shutdown memory | ||
G | Game | In Game mode (indicator flash 1 times), keyboard speed is fast and power consumption is high, be enable in wireless; Shutdown memory | ||
B | ECO | In office energy saving mode (indicator flash 1 times), keyboard speed is fit and power consumption is low, be enable in wireless; Shutdown memory |
Keyboard can be paired 3 Bluetooth devices, and keyboard can be connect to different devices to achieve rapid connection by press the key. Keyboard reset and default to connect the last use of the device. If the keyboard is in the state of cable, you can switch to the Bluetooth state by FN+F12; then one more time to click FN+F12 to back to the cable mode.
Press "FN + Backspace" for 5 seconds, indicator flash 1 times to USB, indicator flash 2 times to auto identify for USB, PS/2 and restart the keyboard. The default settings is set to USB.
Press "FN + T" for 5 seconds, indicator flash 1-3 times are power down time set to 1-3 hours. The default power down time is set to 1 hours.
Press "FN + Delete" for 5seconds, indicator flash, and the key counter will be clear.
Press "ESC + L-ctrl + Delete+ Right" for 5seconds will restore factory settings, restore factory settings will restart keyboard.
There are two modes for the keyboard, OFFICE mode and Custom mode.
OFFICE mode is also Standard mode, as for Custom mode, you can make different configuration to the keyboard, the details for how to configuration and save under custom mode are in below.
NOTE: Press the "Save" of main screen to save the configure when the configure be completed.
How to configure backlight:
Single click the "LightSet" Key in the main screen of Programming software, the dialog box of "Backlight settings panel" will pop out.
Single press "Set All" key, choose the color in the dialog box of "color" that pops out and confirm. Then fast set up all the key color as the chosen color.
Single press "Multi key"key, the dialog box of "Set Multi Key panel" will pop out, choose the key of need to be set and it will show the chosen status. Then single pree the "Set Color"key, choose the color in the dialog box of "color" that pops out and confirm. Then set up much key color as the chosen color.
Single press on any key on the backlight interface, choose the color in the dialog box of "color" that pops out and confirm. Then fast set up the chosen key color as the chosen color.
Click into the "Program" Key after set up the backlight, finish the set up for custom backlight.
Custom backlight are available under both modes. Exchange custom backlight and normal backlight with "FN+".
How to configure keyboard:
Under OFFICE mode, press the "M" key on the top right corner, "M" light turn on, then goes into custom mode. And goes into the OFFICE mode in the opposite way.
All keys on the keyboard are divided into Top layer and FN layer, FN layer can output only when combine with FN.
When finish the set up of all keys in programming software, to save and synchronize the configure with keys, single click the "WriteKeys" in the main screen.
Single click the "Read configuration" in the main screen, it will read the standard configuration of OFFICE mode when under the OFFICE mode and read custom configuration under custom mode.
When the "M" light is on, the keyboard is under custom mode, all the custom functions can be used.
The keyboard can be defined in the overall definition under a custom mode shows a strong programmable feature.
What is Macro
Macro is the whole series actions that you can specify order to the keyboard. Accurately speaking, it's a series key press and key release, record every single time of the key's press, release and delay. Among which, it can automatic input when delay, that is all the time between press and release can automatic input.
How to define a macro?
How to set up delay
Delay is the time between the press and the release of keys. keyboard has the automatic delay record and can modify delay time:
Set up automatic delay record: drive automatic records the time that typing actions need;
Modify delay time(50ms-60000ms, 1000ms=1s): after define a macro, single click the delay time two keys already have, then the delay time will become to be editable and edit the delay time. sigle click the other area of record list to exit the editable status.
How to insert mouse and delay
After recording a macro, right click the key in the edit list, choose operate insert mouse and delay.
What is simulate key stroke?
Simulate key stroke is the function that after you click the simulate key, the keyboard will simulate the key stroke in a fast speed, it ends when the key bounce, it can also set up the speed of key stroke.
How to set up a simulate key stroke?
The keyboard support usual function for multi-media, custom multi-media simplify the layout of keyboard.
The keyboard support Mouse. Unit Time refers to the time required by a mouse cursor move to a cell; Unit Pixel refers to the number of pixels the move a cell in the mouse cursor; First Delay refers to the interval between the mouse cursor moving the first cell to the second cell.
The control key are divide into key function and backlight function.
The keyboard support power function.
There are two circumstances for empty configuration, one is empty single key configuration, the other is empty all the configure keys.
To empty single key configuration, just single click the key and choose "Clear" in the set window.
To empty all the configuration, single click "Clear" in function bar on the main screen.
Every configuration document corresponds to a kind of key stroke mode, so it will be more convenient for the users to configure the common programs of the keyboard. Configuration information include keys set up information and backlight set up information.
You can save those configurations that don't need in a short time on your PC and direct import next time when needed. This can avoid set up repeated.
You can still import the documents saved in PC when using another computer.
The specific ways are below:
Open the configuration
Save configuration
Single click "Get Counter" at the function bar in main screen, after reading the completion, the mouse to move to the corresponding button position, the information box can see the number of times the button is hit.
Upgrade keyboard firmware in order to improve the performance of the keyboard and the function that design for users experience.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Micro 82 that isn't answered in the manual? Leave your question here.