Table of Contents
Advertisement
C. Turning MULTI TIMBRE on and off
Normally, the procedure described above is used to transmit or receive
data on a set MIDI channel (any one of 1 through 16), but by turning the
MULTI TIMBRE function on you can receive more than one MIDI
channel and simultaneously play a different type of timbre on each one.
With this feature, you can use a sequencer such as the Kawai Q-80/
Q-50 to assemble performances with a number of timbres (MULTI
TIMBRE) on the digital piano.
* Procedure
(1) Make sure that the digital piano is in the programming mode.
(See p. 7.)
(2) Press the PIANO2 switch to set the LED next to the PIANO2 switch
flashing.
20%
CJ
PIANO2
(3) Press the highest black key to turn the function "off".
Or press the highest white one to turn it "on".
When MIDI data is received while the MULTI TIMBRE function is off, it
will be played according to the TONE SELECTOR currently selected.
When the MULTI TIMBRE mode is on, the received MIDI data will be
played in the timbre corresponding to the MIDI channel shown in the
chart below, regardless of the TONE SELECTOR currently in effect.
CHANNEL | TIMBRE
CHANNEL
|
O |
FULL ORGAN
WOOD BASS
HARPSICHORD
ELECTRIC BASS
[ 8
| VIBRAPHONE
SLAP BASS
20
6
Advertisement
Table of Contents
