Kawai MR3000 Owner's Manual page 22

(3) Press the CHORUS switch to leave the programming mode. You
may then change to another programming mode.
* In the SPLIT mode, the program number corresponding to the
higher timbre will be transmitted, and the program number for
the lower timbre will not be sent. In the MULTI TIMBRE mode
(see p. 20), however, the program number for the lower timbre
will also be sent, on the channel one higher than the MIDI
channel for the higher timbre.
(b) Using black keys
In addition to transmission with the TONE SELECTORS, you can also
use the black keys on the instrument to send program numbers 0
through 127.
* Procedure
(1) Make sure that the digital piano is in the programming mode.
(See p. 7)
The flashing LED next to the PIANO! switch indicates that the
interface is ready to transmit a program number.
MA
C
PIANO]
(2) Select the program number by pressing the corresponding pair
of black keys at the lower end of the keyboard. There are a total
of 128 numbers possible: the first thirteen black keys give the first
and second digits ("00" — "12") of this three-digit numbers; the next
ten, the final digit ("0" — "9").
ШШ
| First two digits —— | Final digit ——————
«Note: You must press the two keys in order from left to right.
18