Table of Contents
Advertisement
Adjusting the Length of the Grip Belt
Adjust the Grip Beit so that you can press the
Recording Start/Stop Button with the thumb, and
the [W*T] Zoom Lever with the index finger.
1
Unfasten the velcro tape closure.
2
Adjust the length to the size of your hand.
3
Fasten the velcro tape closure.
Attaching the Shoulder Strap
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder.
2
Securely attach the end of the Shoulder
Strap. (More than 2 cm)
3
Attach the other end of the Strap In the
same way.
1
Slide the [EJECT
Lever and remove the
Video Cassette.
2
Turn the [POWER] ON/OFF Switch in.
(The Movie Camera is switched off.)
3
Slide the [BATTERY EJECT ►] Lever to
the right and remove the Battery Pack.
4
Attach the Lens Cap.
Note:
Remove the Battery Pack from the Movie Camera
after use and keep it in a cool place. If the Battery
Pack remains attached to the Movie Camera, a
small amount of current flows to the Movie
Camera, even if the [POWER] ON/OFF Switch is
turned in, and this reduces the charge of the
Battery Pack.
50
Advertisement
Table of Contents
