Advertisement
Important notes about IP Passthrough
• If IP Passthrough is enabled, Wi-Fi, IPv6, firewall and ALG will be off.
The Wi-Fi, the IPv6, the firewall and the ALG setting pages will show
IP Passthrough is on. It will prioritize WAN connections over cellular
if WAN is connected. To enable Wi-Fi, IPv6, firewall, and ALG again
and resume prioritizing cellular connection, IP Passthrough must be
disabled.
• When IPPT is enabled, only one of the four LAN ports (LAN 1) can be
used to an external device through Ethernet for obtaining IP address.
The IP address will then be assigned to the only external device
connected to this router.
• When IPPT is enabled, there could be potential signal disruption to
WWAN network, such as carrier network outage, and no IP address
is available for this router. In this case, connect your computer to the
WAN port of this router and access the Web UI (192.168.0.1) on a
web browser. Then disable IP Passthrough with the toggle switch to
resume default router functions.
4
Advertisement
