Pioneer F-Z92 Service Manual page 17

(6) Display section
Shows current time, received frequency; contents of timer settings, etc.
@® MONO indicator
Lights when the FM MONO switch is set to ON. When this indicator
is lit, FM stereo broadcasts are reproduced monaurally.:
TUNED indicator
Lights when a broadcast is received.
© STEREO indicator
Lights when an FM stereo broadcast is received when the FM MONO
switch is set to OFF.
© Timer indicators
These show which timers have been set.
© SLEEP indicator
Indicates that the sleep timer is operating.
©) Remote control indicator
Flashes when a command is received from the remote contro! unit.
@© Deck REC TIME indicator
Lights when deck is recording.
® Time display
Usually this shows the present time. When recording, it shows the
elapsed time since recording began.
@) Frequency display
Shows received broadcast frequency. Also gives scrolling display of
main function status.
8. SPECIFICATIONS
FM Tuner Section
FreQuency Fane .............cccescccceeeseeeeenaees 87.5 MHz to 108 MHz
Usable Sensitivity ............. Mono: 12.5 dBf, IHF (1.2 nV/75 ohms)
Sensitivity (DIN) .................0s Mono S/N 26 dB: 0.9 nV/75 ohms
Stereo S/N 46 dB: 50 »V/75 ohms
Signal-to-Noise Ratio (IHF, 85 dBf Input) ................. Mono: 77 dB
Signal-to-Noise Ratio (DIN)......... 0.0 eee cece eee e ee eees Mono: 66 dB
Stereo: 60 dB
DISTORIG Hic dikrcaics oxen bencteeccneeanshesadturkuthexedex Stereo: 0.5% (1kHz)
PMENM a: INDUL cccceseaisrdorsiadavasds venssastsassaeeses 75 ohms unbalanced
22
@) STATION CALL switches
These are used to recall memorized stations and to memorize stations.
ADJ switch
Used for setting the current time.
(8) ~-, + switches
{During tuning]
These are used to locate the stations.
The "*—"' switch to go to a lower, and the '' +'' switch to go to a higher
frequency.
[During time and timer setting]
Used for decreasing ''-"' or increasing ''+'' the values when setting
the time or timer.
BAND selector switch
[For model F-Z92}
Each time this switch is pressed, FM or AM reception is selected
alternately.
FM and MHz light: FM reception
AM and kHz light: AM reception
[For model F-Z92L]
Each time this switch is pressed, FM, MW or LW reception is selected
alternately. |
FM and MHz light: FM reception
AM and kHz light: MW or LW reception
(}) MEMORY switch
This switch is used to memorize stations. When the switch is pressed,
the frequency display will flash. To memorize the frequency of any
Station, press the station call switch while the frequency display flashes.
MW (AM) Tuner Section
Frequency range
When 10 kHz step ........... ccc cccceeencceceenes 530 kHz to 1,700 kHz
When 9 kHz step .............cc cc cccecweseeeeees 531 kHz to 1,602 kHz
Sensitivity (IHF, Loop antenna) .................ccceceeeeeeeeenes 350 nVim
PICT vaccenvloe ts eons ansskatetcaniicdcevats sriteueeeei seem Loop Antenna
Output Level (AM 30% MOD) .............. ccc cece see cce ner eeeees 150 mV
LW Tuner Section
(For LW-equipped models only)
FrEQUENCY FANGE .........2..cccenc ce cee eect eeteeeaeeens 153 kHz to 281 kHz
Sensitivity (IHF, Loop antenna) .............0..ccecceeereeeeees 1500 pV/m
PRIUCT NG esd soo assets eros ewes sane esas Loop Antenna
Output Level (AM 30% MOD) ....... 0... ccc eee eee ec eee een eeee 150 mV
Miscellaneous
DIMENSIONS ..............ccceescesseeeees 360 (W) x 63 (H) x 315 (D) mm
, 14-3/16 (W) x 2-1/2 (H) x 12-3/8 (D) in
Weight (without package) ........... paacecetecemicisn 2.2 kg (4 Ib. 14 02)
Furnished Parts
EM T-type: ANLerind oii sciccciecccancsceaneannncc desc cadet sends etascevewnses ces 1
AM LOOp ANtenina ..........ccccccccnccsncsscccccccecsssassssancnssaceeereesaess 1