Advertisement
C
ONNECTING
1. Connect one set of Audio/Video cables to the VIDEO and AUDIO
jacks of the Video Sender. Take care to match the colors of the plugs on
the cable with the jacks on the Video Sender.
2. Connect the other end of the cable to the Audio/Video OUT jacks on
your primary TV (the one you want to send the picture FROM). Take
care to match the colors of the plugs on the cable with the jacks on the
TV. If the jacks on the TV are colored differently, connect the yellow
plug to the jack labelled VIDEO, the red plug to the jack labelled
AUDIO RIGHT and the white plug to the jack labeled AUDIO LEFT.
Note: If your TV does not include Audio/Video OUT jacks, you will
need to remake the connections as shown in diagram b) using the
TV antenna (coaxial) connections to link up the DBS Receiver/
Cable Box/VCR to your TV.
A/V Cable
a) Connections for a TV
with A/V OUT jacks.
4 4 4 4 4
U
P
Coaxial
Cable
b) Connections for a TV
without A/V OUT
jacks.
3. Plug the Video Sender's Power Supply (the smaller of the two power
supplies) into a convenient 120 volt wall outlet and plug its jack into the
Video Sender.
4. Position the Video Sender in a convenient location such as on top of the
TV and orient the antenna so that the flat side points in the direction of
the room where you will be installing the Video Receiver.
I
A/V
F YOU HAVE SEVERAL
COMPONENTS
If you have two or more A/V components
(e.g. DBS, VCR, Cable Box, DVD, etc.)
that you want to watch in another room,
they will probably already be hooked up to
the local TV in series (see the diagram to
the right). To connect the Video Sender
you just need to identify the last component
in the chain and connect its LINE OUT
jacks to the Video Sender's A/V jacks.
If the last component in the chain does not
have spare LINE OUT jacks, reconnect
the TV to the last component in the chain
using the included COAX cable to connect
the VHF/UHF ports, then use the A/V
connections for the Video Sender.
Point the small tubular antenna up if you
intend to use the IR Extender feature (See
page 7).
I
V
S
F YOU WANT TO USE YOUR
IDEO
S
S
YOUR
TEREO
YSTEM ONLY
Just hook up the Video Sender using only the red and white jacks for the
right and left channels of the audio signal. Leave the yellow (video) jack
unconnected.
5 5 5 5 5
TV
DVD Player
DBS (S atellite)
Receiver
Cable Box
ENDER TO TRANSMIT FROM
Advertisement
