Related Manuals for X10 VT32A
Summary of Contents for X10 VT32A
- Page 1 Audio/Video Sender for use with X10 Video Sender Systems MODEL VT32A OWNER'S MANUAL WIRELESS VIDEO SENDER...
-
Page 2: Fcc Caution
The VT32A Video Transmitter works with the VR30A Video Receiver. Both are included in the VK54A Wireless Video Sender kit. You connect the VT32A Sender to your DBS receiver, VCR, Cable Box, etc., and connect the VR30A Receiver to the TV which can be in another room, up to 100 feet away. - Page 3 ONNECTING 1. Connect one set of Audio/Video cables to the VIDEO and AUDIO jacks of the Video Sender. Take care to match the colors of the plugs on the cable with the jacks on the Video Sender. 2. Connect the other end of the cable to the Audio/Video OUT jacks on your primary TV (the one you want to send the picture FROM).
-
Page 4: Troubleshooting
2.4 GHz, check the other device's owner's manual for the frequencies of each channel that it uses. X10 Video Senders use the following frequencies: Channel A: 2.411 GHz, Chan B: 2.434 GHz, Chan C: 2.453 GHz, Chan D: 2.473 GHz. -
Page 5: 12 Month Limited Warranty
PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.