(Ir543) - X10 Big Picture VK25A Owner's Manual

U IR M
SING AN
If you already own an IR Mini Controller (Model IR543), you will
need to change the X-10 Home Automation code in the remote to use
it. The code for standard X-10 RF Home Automation is 013. This
code is used for transmitting RF commands to an X-10 Transceiver.
The code to control the IR Mini Controller is 014. To change the
code:
1. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
2. Press and release the X-10 button.
3. Enter 014 to control an IR Mini Controller, or 013 for
standard X-10 RF control. The LED turns off after the last
digit entered.
Note: In most cases, you will not need to use an IR Mini Controller to
receive commands from the Mouse Remote - the Transceiver Module
(or any X-10 Security System) does this for you and has the added
advantage of working through walls. It also has the advantage of
letting you control up to 16 X-10 Modules - i.e. with a Transceiver
when you press 1-6-ON you turn on Module number 16. With an
IR543 when you press 1-6-ON you turn on Modules 1 AND 6. The
IR543 can only control 10 Modules (1-9 plus 0=10). You cannot
control the IR Mini Controller and the Transceiver Module at the same
time from the X-10 button, but you can program an IR Mini Controller
under the AUX button.
C
INI ONTROLLER
62

(IR543)