Ideo; Ooking Up Thev - X10 Big Picture VK25A Owner's Manual

H
OOKING UP THE
1. Using cable
Receiver to the Video IN jacks on your TV.
Bulleted numbers
refer to the cables
on page 11.
2. Plug the Video Sender Receiver into a 120 volt wall outlet.
3. Set power switch to ON.
4. Position the Video Sender Receiver in a convenient location and
orient the antenna so that the flat side points in the direction of the
room where you set up the Video Sender Transmitter.
I TV
F YOUR DOES NOT HAVE
A/V L I
INE N CONNECTORS
You can use the supplied coaxial
F connector cable
the TV OUT socket on the Video
Sender to the Antenna input on
your TV. If you already have an
antenna connected to your TV,
you will need to use a standard
TV antenna splitter.
Set your TV and the TV Channel
switch on the Video Sender to the
same channel (3 or 4).
V S

IDEO

ENDER
connect the LINE OUT jacks the Video Sender
AUDIO
VIDEO
L R
VIDEO L R
AUDIO
to connect
17
R
ECEIVER
TV
TO TV
TO TV ANTENNA
1 2
TV
UHF/VHF
ANTENNA
TV