Table of Contents
Advertisement
Adjusting
1.
Release the backrest, and tilt it forward.
2.
Fold the frame up until it engages.
3.
Fold back and engage the rear seat
backrest.
Folding back the backrest
Fold up the backrest and press it into the
latch. Make sure that the seat belt is not
caught behind the backrest or in between
the backrest and the rear seats.
Variable cargo area floor
Principle
With the variable cargo area floor, the cargo
area can be configured corresponding to
transport requirements.
General information
Follow instructions on securing cargo, refer
to page 227.
Online Edition for Part no. 01405A7DAD4 - II/23
Cargo area
Removing the cargo floor panel
On 5-door models: To change the position of
the cargo floor panel, first fold up the rear
part of the cargo floor panel.
Grasp the cargo floor panel in the rear and
fold slightly upward. Next, pull it backward
from the supports.
The cargo floor panel can be removed from
the cargo area above the tail lights.
CONTROLS
231
Advertisement
Table of Contents
