Figure 8A. Mower Arbor
Normal uare
CHECK BEVEL GEAR BOX FLUID
Check the bevel gear box fluid level. Remove the fill plug (A,
figure 9) and wipe oM off attached pin. insert the fill plug
loosely in hole (do not screw in). In this position, the fluid
should just touch the bottom of the pin. If not, add
multipurpose powertrain oil. Do not overfill.
To drain oil, loosen the capscrews on the rear cover plate.
Figure 9. Bevel Gear Box
A. Oil Fill/Check Plug
B. Bevel Gear Box
17