Table of Contents
Advertisement
2. Product specifications
„ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message
"Connecting to Anynet+
appears on the
device..."
screen.
The Anynet+ device does not
play.
The connected device is not
displayed.
The TV Programme cannot be
recorded.
The TV sound is not output
through the receiver.
2-12
• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
• Only one receiver (home theatre) can be connected.
• Check if the Anynet+ device power cord is properly connected.
• Check the Anynet+ device's Video/Audio/HDMI cable connections.
• Check whether
Anynet+ (HDMI-CEC)
• Check whether the TV remote control is in
• Check whether the remote control is Anynet+ compatible.
• Anynet+ does not work in certain situations. (Searching channels, operating
or
Downloads
Plug & Play
• When connecting or removing the HDMI cable, please make sure to search devices
again or turn your TV off and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
• Check if the Anynet+ device is properly connected to the TV and check if the
is set to
Anynet+(HDMI-CEC)
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
• Select
in the Anynet+ menu.
View TV
• Press the SOURCE button on the TV remote control and select a device other than
Anynet+ devices.
• Press < CH >, CH LIST , PRE-CH, and FAV.CH to change the TV mode. (Note that
the channel button operates only when a tuner-embedded Anynet+ device is not
connected.)
• You cannot use the remote control when you are configuring Anynet+ or switching to
a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is
complete.
• You cannot use the play function when
• Check whether or not the device supports Anynet+ functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether
Anynet+ (HDMI-CEC)
• Search Anynet+ devices again.
• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables
may not support Anynet+ functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power
cord or a power failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
• Connect the optical cable between TV and the receiver.
Possible Solution
is set to
in the
On
mode.
TV
(initial setup), etc.)
in the
menu.
On
System
Plug & Play
is set to
in the
On
menu.
System
(initial setup) is in progress.
menu.
System
My
Advertisement
Table of Contents
