Advertisement
3) I2C communication turned off.
Note:
To return Bus on status, press and hold the CALL button on the remote control, then press
the Volume
+ button on the TV again. TV will be turned off and automatically turned
on, then status will be Bus On.
Setting TVOP
Enter to service mode and select menu of TVOP by pressing P
adjustment menu. After selecting TVOP, press
disable or enable as below.
TVOP
FUNCTION DESCRIPTION
D5 (bit5) I2C check between IC700 and IC400. (WDT) Disable Enable
Setting Panel Option Data
Panel option data is subject to OP4 and OP5.
Enter to service mode and select menu of OPT4 or OPT5 by pressing P
display of adjustment menu. After selecting OPT4 or OPT5, press
or OPT5 value as table below.
Panel option data
Series
C3500 EU Ready
Model name
32C3500P/3502P/
3005P/3006P
37C3500P/3502P/
3005P/3006P
42C3500P/3502P/
3005P/3006P
+ or
- to set I2C check function to
1
0 (Normal)
Panel vendor
OPT4 value
IPS
0x07
LPL
0x01
IPS
0x07
LPL
0x01
LPL
0x01
or P
during display of
or P
during
+ or
- to set OPT4
OPT5 value
0x05
0x05
0x06
0x06
0x07
Advertisement
