Table of Contents
Advertisement
WORF
• When set to 'Enable' , Hour and Minute items are enabled and then the WORF function is enabled.
• When set to 'Disable' , 'Hour' and 'Minute' items are disabled and then the WORF function is disabled.
Room Number Setting
• You can set Label and Room Number using the Room Number Setting.
Media Type
(Depending on model)
• Sets the media type to RF or IP.
• The default value is RF.
RF
(Depending on model)
• Data Channel Freq (KHz)
- Sets the RF frequency at which the Pro:Centric data is received.
• Data Channel Type
- Sets the RF modulation type to DVB-T or DVB-C.
The default value is DVB-C.
IP
• P:C IP Setting
- Server Address is set to IP Address.
- Can select IPv4 or IPv6 type using 'IP Type' . (Depending on model)
(IP Address)
(Port Number)
- Server Address is set to Domain Name.
(Domain Name)
(Port Number)
- The default value of IP(IPv4) is 0 and the range is between 0 and 255.
- The default value of IP(IPv6) is 0 and the range is between 0 and FFFF.
- The default value of Port is 0 and the range is between 0 and 65535.
Receive Data
• Sets Enable or Disable.
Native EPG
• When Pro:Centric Mode is set to 'Off' or 'Configuration Only' , 'Native EPG' is forced to be 'Enable' and unable to change.
• When set to 'Enable' , You can use the TV Guide Application.
Set IPv4 or IPv6 address.
Sets the actual port or number where the Pro:Centric server is running.
Sets the domain name where the Pro:Centric server is running.
Sets the actual port or number where the Pro:Centric server is running.
31
Advertisement
Table of Contents
