Advertisement
No Raster on COMPONENT Signal
Pass
Check Input source
Cable And Jack
Pass
Check The Input/Output
Of JK1601, JK1602
Pass
Check the Input/Output
Of IC101
Pass
Repeat [A], & [B] Process
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Fail
Re-soldering or
Change the defect part
Fail
Re-soldering or
Change the defect part
No Raster on HDMI Signal
Pass
Check Input source
Cable And Jack
Pass
Check the Input/Output
Of JK801, JK802, JK803
Pass
Check the Instart Menu
EDID D/L Status
Pass
Check the Input/Output
Of IC103
Pass
Check the Input/Output
Of IC101
Pass
Repeat [A], & [B] Process
- 22 -
Re-soldering or
Fail
Change the defect part
Re-download EDID Data]
Fail
(Adjust Menu EDID D/L)
Re-soldering or
Fail
Change the defect part.
Re-download HDCP
Re-soldering or
Fail
Change the defect part
LGE Internal Use Only
Advertisement
