Adding A Local Printer - X-Micro XBT-PACX Quick Start Manual

ADD LOCAL PRINTER
In the following example, we assume a X-Micro Combo Bluetooth Printer Adapter (with series# :
BT-PRT-B0A351) is connected to an EPSON Stylus C61 printer.
Step 1 :
From MY BLUETOOTH PLACES, Right click on
Printer Adapter folder (with series# :
BT-PRT-B0A351), then select OK to install a
printer driver for it.
Step 2 :
Add Printer Wizard will show up, find the brand
name and model number of the printer driver you
want this Printer Adapter to use. It will ask you to
install the printer driver if it has not been installed
in your system before. If the driver has been
installed, Add Printer Wizard will pass very quickly.
In this example, we select EPSON Stylus C61 as
the printer, supposed its driver was installed
before, so just click OK to continue.
Step 3:
You can assign a name such as EPSON Stylus
C61 Series to the Printer Adapter just selected. At
end user side, you will only find a printer named
EPSON Stylus C61 Series, you will not see any
printer named BT-PRT-B0A351.
Click OK to complete the installation.