Page 1
IEEE 1394 FireWire 1394 PCI Adapter User Manual...
Page 2
Introduction Thank you for purchasing X-Micro FireWire 1394 PCI Adapter. You bought a product designed to meet highest requirements not only technically, but also in respect to reliability, equipment, and ease of use. To enjoy your new device for a long time, please carefully read these operating instructions, and observe following notes and tips.
Installation Instructions • Insert the X-Micro FireWire 1394 PCI Adapter in a free PCI slot in your PC, and then turn-on the computer. • The Add New Hardware Wizard window appears, see below. • Click "Next". The next window appears.
Page 4
• Select "Specify a location", and enter the path of your operating system (Windows 98 in the example above). Then click "Next". • Now the system searches the drivers for X-Micro FireWire 1394 PCI Adapter. Click "Next", to continue the installation.
Page 5
• When your operating system is Windows 98, the prompt to insert the Windows 98 SE CD into the CD-ROM drive appears now. Do as prompted, and then click "OK". The installation under Windows ME / 2000 / XP runs automatically.
Page 6
• Now open the Device Manager via "My Computer". When the "1349 Bus Controller" is indicated there, the X-Micro FireWire 1394 PCI Adapter is successfully installed, and you can now use the entire range of the device's functions. CAUTION: Damages caused by improper operation resulting from non-observance of these operating instructions or the safety instructions cause the warranty claim to expire.
Need help?
Do you have a question about the FireWire 1394 and is the answer not in the manual?
Questions and answers