Altech SW-04 User Manual page 6

Adjusting the Force settings P1, P2, P3, and P4 to levels higher than the default setting may lead to
adverse consequences. Setting the force too high can cause the motor to continue operating even
at full opening or closing, posing a risk of damage to the gate opener.
1. Always check the light indicator on the Control Board after adjusting the Force settings.
2. If the motor's light indicator remains illuminated after adjustment, lower the Force settings to a
more appropriate level to prevent potential damage to the motor.
3. Verify that the light indicator on the Control Board corresponds to the motor's status.
Failure to adjust the Force settings within the recommended range may result in motor malfunction Failure to adjust the Force settings within the recommended range may result in motor malfunction
or burnout, leading to costly repairs or replacements. Always exercise caution and follow the
specified guidelines to ensure the safe and proper operation of the swing gate opener.