Table of Contents
Advertisement
Quick Links
Owner's Manual
Model No.
VM2400
VM2400-VS
VM2401
VM2401-VS
NOTE: This manual references models with a 120V blower and "B" type electric plug. This
manual is also valid for 220V Airsled systems sold with the respective, country-specific
Vending Mover
Covers Vending Mover Models:
Description
Vending Mover
Vending Mover
Vending Mover
Vending Mover
electrical cord/plug sets.
Lift rating
Speed
(lbs.)
1,400
Single
1,400
Variable
1,400
Single
1,400
Variable
Vacuum
Capability
No
No
Yes
Yes
Advertisement
Table of Contents
Related Manuals for AIRSLED VM2400-VS
Summary of Contents for AIRSLED VM2400-VS
- Page 1 Vending Mover 1,400 Single VM2401-VS Vending Mover 1,400 Variable NOTE: This manual references models with a 120V blower and “B” type electric plug. This manual is also valid for 220V Airsled systems sold with the respective, country-specific electrical cord/plug sets.
- Page 2 * IMPORTANT Vending Mover air beams are 12” W x 39” L and are recommended for loads up to 35” deep. If the load’s depth is greater than 35”, Airsled’s Side Access air beams which are 10” W x 48” L are recommended.
- Page 3 35” deep. If dealing with a load greater than 35” deep or require rotating the load 90 degrees to pass through a narrow opening, Airsled offers a set of 10” wide x 48” long Side Access air beams.
- Page 4 GOING OVER POROUS SURFACES SUCH AS CARPETING All Airsled systems come with plastic Rough Surface Adapters (RSAs). The RSAs are 10” wide x 36” long and laid on top of the porous surface. The air beams MUST BE PLACED OVER THE RSAs in order for your system to perform properly.
- Page 5 Figure 10 CARE AND MAINTENANCE Airsled systems are proudly made in the USA using the highest quality materials. If properly used and maintained, your Airsled product will have a long service life. To ensure optimal performance and longevity, we recommend the following: •...
- Page 6 METAL MEMORY LEADING TO SLIGHT BOWING OF AIR BEAMS All Airsled aluminum air beams start off as a massive coil before being cut and processed into the final, rectangular panels. During the processing steps, the internal, stored energy of the aluminum is released which may lead to minor bowing in some of the rectangular panels.
- Page 7 Spacer sticks Vacuum nozzle and hose attachments Complete blower for AM2401 PA3751 • 4HP / 120v / 11.3 amps Note: 4HP 220v blowers are 5.7 amps Support Email: airsled@airsled.com 66 Albe Dr. Toll Free Number: 1-800-AIRSLED (1-800-247-7533) Newark, DE 19702...
- Page 8 Page 7 of 7 LIMITED PRODUCT WARRANTY Airsled, Inc. (warrantor) uses the utmost care in the manufacturing of its products and this is warranted to be free from defects in material and workmanship, subject to the following limitations, qualifications and conditions.
Need help?
Do you have a question about the VM2400-VS and is the answer not in the manual?
Questions and answers