Advertisement
TX3 Cloud Gateway Installation
Manual
The TX3 Cloud Gateway connects a TX3 system to the TX3 Vision Configurator as shown
below.
TX3 Vision
Internet
Ethernet
TX3 Cloud
Gateway
1.
Installation
1.1.
Items Required
•
TX3 Vision Cloud Gateway unit (TX3-CLOUD-GATEWAY)
•
Power Adapter (included with TX3 Vision Cloud Gateway unit)
•
Ethernet cable
1.2.
Preparation
1. Connect the Ethernet cable to LAN port 1 of the unit, ensuring it is connected to the
internet.
LT-6773 Rev 0 February 2024
Router
Card access
controller
2 card reader
Ethernet
EXISTING TX3
NETWORK
TX3 Cloud Gateway Installation Manual
Lobby Control Unit
Elevator
Restriction Unit
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
*
0
#
RS-485 Network
Card access
controller
1 card reader
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Microm TX3
Summary of Contents for Microm TX3
- Page 1 TX3 Cloud Gateway Installation Manual TX3 Cloud Gateway Installation Manual The TX3 Cloud Gateway connects a TX3 system to the TX3 Vision Configurator as shown below. TX3 Vision Internet Router Card access Lobby Control Unit controller Card access Elevator 2 card reader...
- Page 2 HDMI/DP/USB3.0 are intended for internal use only, not for customer use. Activation This process activates the TX3 Cloud Gateway, enabling it to work with your TX3 system. 1. Contact the Mircom sales department to purchase a TX3-Vision account and job site license.
- Page 3 TX3 Cloud Gateway Installation Manual 8. Click on Command > Activate Device. 9. Enter the serial number of the gateway, which can be found on the gateway unit. The purpose of the serial number is to identify and activate the device; it is in the format XXXX-XXXX-XXXX and consists of both letters and numbers.
- Page 4 TX3 Cloud Gateway Installation Manual Wait for the device to be activated successfully. 12. Click Finished. LT-6773 Rev 0 February 2024...
Need help?
Do you have a question about the TX3 and is the answer not in the manual?
Questions and answers