Specifying The Character Width - Brother P-touch 2470 User Manual

Specifying the character width

Formatting the Global width of all text
Press t.
1
Press l or r until G. WIDTH is displayed.
2
Press u or d until the desired character width setting is displayed.
3
Press n. The selected setting is applied to the entire text.
4
Formatting the width of a line
1
Move the cursor to the line of text whose character width you wish to change.
Press g, then E.
2
Press l or r until WIDTH is displayed.
3
Press u or d until the desired character width setting is displayed.
4
Press n. The selected setting is only applied to the text line that the cursor is
5
positioned in.
The following width sizes are available for each text size as shown.
Width
NORMAL
Size
48 points
36 points
24 points
18 points
12 points
9 points
28
NARROW THIN WIDE