AP864038
RaluWir Power Bank
USER MANUAL
It is recommended to read this user manual
carefully and keep it for future reference.
CHARGING THE POWER BANK
1. Plug the Micro USB / Type -C end of the charging cord into the Micro USB/Type-
C Input of the power bank.
2. Plug the USB Connector end of the charging cord into the USB port of any
computer or USB compatible wall charger.
3. The LED indicator will show the percentage (25%,, 50%,, 75%, and 100%) of the
battery charged.
4. Average charging time is 3-5 hours from empty.
USING THE POWER BANK
TO CHARGE YOUR MOBILE DEVICE
1. Use the Micro USB cable or type C cable thru USB/Type C port to
charge an Android phone or Android compatible device.
2. Use a lightning cable thru USB/Type C port to charge an iPhone or
Apple compatible device.
POINTS FOR ATTENTION
The first use of this product cycle: Charge and discharge once. This improves the
lifetime of the product. Please read all the instructions carefully before using the product.
This item is in conformity with the following standards:
• RoHSDirective 2011/65/EU and itssubsequent amendments Directive (EU)
2015/863
• RadioEquipment Directive (RED) - Directive 2014/53/EU
• UK Electrical Equipment (Safety) Regulations (SI 2016/1101)
• UK Radio Equipment Regulations (SI 2017/1206)
INTRODUCTION
This product is compatible with most smartphones, tablets, and mobile devices in the
market. Please read the instructions carefully before use.
PRODUCT DESCRIPTION
SPECIFICATIONS
Battery Capacity & Type: 4000mAh (14,8 Wh), Polymer Lithium Battery
Interface: 1 * USB, 1 * Type C
Input: 5V DC 2A
Output: 5V DC 2A
Wireless charger output: 15W max.
Frequency: 110-205KHZ
Protection: Over load, over current, short circuit, over volatile protection
SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed,
including the following
1. Read all the instructions before using the product.
2. To reduce the risk of injury. Close supervision is necessary when the product
is used near children.
3. Do not expose the device to moisture.
4. Do not use the device in excess o f its output rating. Overload outputs above
rating may result in a risk of fire or injury.
5. Do not use the device if damaged or modified.
6. Damaged or modified batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
7. Do not disassemble the device. Take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of fire or
injury.
8. Do not expose the device to fire o r excessive temperature exposure to fire or
temperatures above 212'F may cause explosion.
9. Have servicing performed by a qualified repair person using only identical
replacement parts.
10. This will ensure that the safety of the product is maintained. If any improper
use or any operation against the user manual. We will not be responsible for
the problems. We reserve all the rights for the final explanation.
This symbol both in the product and its user manual indicates that at the end of the devices electrical
life, it should be recycled separately from your household waste. There are adequate means to dispose
of this material for proper recycling. For more information, contact your local authorities.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
0
Fast charging output
f)
TYPE-C Bi-directional In and out
9
Battery Indicator
O
Switch
Distributor: Cool Collection 1476, Budapest,
POB:176. Hungary
Registration nr. 01-09-276783
Made in China
Need help?
Do you have a question about the RaluWir AP864038 and is the answer not in the manual?
Questions and answers