Wolf IS15/S Installation Instructions Manual page 10

W O L F
M O D U L E
IMPORTANT NOTE: Removal of the steamer
module should only be performed by a Wolf
authorized service center technician.
If removing the steamer module is necessary
for cleaning or service, first disconnect the
electric supply. Remove the mounting brackets
on each side of module and remove. To
reinstall, refer to page 9.
The module must be disconnected from
power prior to removal and service.
10
S T E A M E R M O D U L E
R E M OVA L T R O U B L E S H O O T I N G
IMPORTANT NOTE: If the steamer module
does not operate properly, follow these
troubleshooting steps:
Verify that power is being supplied to the
module.
Check electrical connections to ensure that
the installation has been completed
correctly.
Follow troubleshooting procedures as
described in the Wolf Steamer Module
Use & Care Information.
If the module still does not work, contact a
Wolf authorized service center. Do not
attempt to repair the cooktop module
yourself. Wolf is not responsible for service
required to correct a faulty installation.
Dimensions in parentheses are in
millimeters unless otherwise specified.