Table of Contents
Advertisement
MAINTENANCE & STORAGE
Maintenance (Cleaning the Electrolysis Cell)
• Clean the electrolysis cell to extend the lifetime of the platinum electrode by
producing acidic water.
• We recommend customers clean the electrolysis cell by activating the acidic water
about two times per month for 10 minutes, at a low flow rate.
How to Store the Unit
• Must be moved only after power is turned off.
• When storing, the ionizer should be clear of water.
• Outlet and inlet hose should be kept clean.
• Unplug when not in use for a long time.
• Do not store in a humid place.
Replacing the Fuse
Unplug unit from power source before replacing fuse.
CAUTION
Fuse is located on the lower side of
the body.
1. Fuse can be removed if rotated
counterclockwise with a
screwdriver.
2. Please remove fuse with finger.
3. Insert the new fuse (240V, 3.15A).
4. Tighten the fuse, rotating it
clockwise with a screwdriver.
NOTE: When changing the fuse, please
make sure to unplug the power cord first.
Not doing so may cause electric shock.
19
Advertisement
Table of Contents
