Basic Functions - Philips BDH4241V User Manual

5. BASIC FUNCTIONS

Main Input
TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2
Move [- CH +] Select [- VOL
5.1
Make sure the monitor is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1 Press the POWER key on the front panel or the remote control.
2 Turn off the power by pressing the POWER key on the front panel
5.2
Using Front Panel or Remote Control
1 Press the
2 Pressing the
3 Press the
+] Exit [MENU]
User Manual BDS4241V/BDH4241V/BDH5021V
POWERING ON / OFF
=> The monitor will now turn on after a brief pause. The STATUS
LED will now turn green to indicate power on status.
or the remote control again.
SELECTING SIGNAL SOURCE
INPUT key on the front panel or the AV key on the
remote control.
CH+ or CH- key will cycle the monitor through all
available input signal sources in the following order:
SCART1 - SCART2 - VIDEO - S-VIDEO - COMPONENT
- RGB - DVI
VOL+ or VOL- button to select the source.
17