Basic Functions; Powering On/Off; Selecting Signal Source - Philips BDH5021V/27 User Manual

5. BASIC FUNCTIONS

Main Input
VIDEO 1
VIDEO 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2
Move [- CH +] Select [- VOL +] Exit [MENU]
User Manual BDS4241V/BDH4241/BDH5021V
5.1 POWERING ON / OFF
Make sure the monitor is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1. Press the POWER key on the front panel or the remote control.
=> The monitor will now turn on after a brief pause. The STATUS
LED will now turn green to indicate power on status.
2. Turn off the power by pressing the POWER key on the front panel
or the remote control again.
5.2

SELECTING SIGNAL SOURCE

Using Front Panel or Remote Control
1. Press the INPUT key on the from panel or the AV key on the
remote control.
2. Pressing the CH+ or CH- key will cycle the monitor through all
available input signal sources in the following order:
VIDEO1 - VIDEO2 - VIDEO - S-VIDEO - COMPONENT
- RGB - DVI
3. Press the VOL+ or VOL- button to select the source.
18